DITL_9999.txt
Items: (1 entries)
  0:
    Bounds: x1=5, y1=2, x2=313, y2=165
    Type: 64
    Info: '''

DITL_210_Bad Machine.txt
Items: (4 entries)
  0:
    Bounds: x1=215, y1=155, x2=295, y2=175
    Type: 4
    Info: 'Quit'
  1:
    Bounds: x1=61, y1=10, x2=295, y2=29
    Type: -120
    Info: 'Wrong Machine!'
  2:
    Bounds: x1=61, y1=32, x2=302, y2=145
    Type: -120
    Info: 'This version of SoftPC will run on the Macintosh Classic, LC, SE, Portable, and the Plus. You need SoftPC for the SE/30 and Mac II Family.'
  3:
    Bounds: x1=10, y1=10, x2=42, y2=42
    Type: -96
    Info: ' '

DITL_209_Memory Short.txt
Items: (4 entries)
  0:
    Bounds: x1=215, y1=155, x2=295, y2=175
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=61, y1=10, x2=295, y2=29
    Type: -120
    Info: 'You are nearly out of memory!'
  2:
    Bounds: x1=61, y1=32, x2=302, y2=145
    Type: -120
    Info: 'To avoid a possible crash, Save your work and Quit SoftPC as soon as possible.To increase the amount of memory available to SoftPC, you might try turning off the RAM Cache or removing some INITs or CDEVs.'
  3:
    Bounds: x1=10, y1=10, x2=42, y2=42
    Type: -96
    Info: ' '

DITL_208_Bad Floppy.txt
Items: (2 entries)
  0:
    Bounds: x1=254, y1=75, x2=334, y2=95
    Type: 4
    Info: 'Eject'
  1:
    Bounds: x1=74, y1=10, x2=339, y2=64
    Type: 8
    Info: 'This diskette is not an MS-DOS diskette. Use AccessPC¨ from Insignia Solutions or AFX to initialize MS-DOS diskettes.'

DITL_207_Memory Full.txt
Items: (4 entries)
  0:
    Bounds: x1=148, y1=107, x2=273, y2=127
    Type: 4
    Info: 'Return To Finder'
  1:
    Bounds: x1=57, y1=10, x2=257, y2=26
    Type: -120
    Info: 'CanÕt get enough RAM to run!'
  2:
    Bounds: x1=57, y1=30, x2=279, y2=98
    Type: -120
    Info: 'There isnÕt enough available memory to run SoftPC. You might try turning off the RAM Cache or removing some INITs, CDEVs, etc.'
  3:
    Bounds: x1=10, y1=10, x2=42, y2=42
    Type: -96
    Info: '  '

DITL_206_No Memory.txt
Items: (4 entries)
  0:
    Bounds: x1=167, y1=106, x2=287, y2=126
    Type: 4
    Info: 'Return to Finder'
  1:
    Bounds: x1=60, y1=10, x2=250, y2=26
    Type: -120
    Info: 'Not Enough Available RAM!'
  2:
    Bounds: x1=60, y1=30, x2=289, y2=97
    Type: -120
    Info: 'Try turning off the RAM Cache or removing some unnecessary INIT and CDEV files from your System Folder, then Restart your Mac.'
  3:
    Bounds: x1=10, y1=10, x2=42, y2=42
    Type: -96
    Info: '  '

DITL_205_no postscript.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=188, x2=332, y2=208
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=262, y1=158, x2=332, y2=178
    Type: 4
    Info: 'Continue'
  2:
    Bounds: x1=63, y1=16, x2=277, y2=35
    Type: -120
    Info: 'CAUTION: No Postscript Printer!'
  3:
    Bounds: x1=21, y1=50, x2=330, y2=148
    Type: -120
    Info: 'Output direct to a Postscript printer has been requested and no Postscript printer is available. This Print request should be cancelled and an available PostScript printer selected in the Chooser, or the Print Option should be reset to Epsonª FX-80.'
  4:
    Bounds: x1=21, y1=160, x2=256, y2=180
    Type: 8
    Info: 'Continue Ñ IÕll take my chances.'
  5:
    Bounds: x1=21, y1=190, x2=256, y2=210
    Type: 8
    Info: 'Cancel this print request.'

DITL_204_print pending alert.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=89, x2=332, y2=109
    Type: 4
    Info: 'Print'
  1:
    Bounds: x1=262, y1=120, x2=332, y2=140
    Type: 4
    Info: 'Discard'
  2:
    Bounds: x1=63, y1=16, x2=283, y2=36
    Type: -120
    Info: 'CAUTION: Printouts will be lost!'
  3:
    Bounds: x1=12, y1=50, x2=336, y2=82
    Type: -120
    Info: 'One or more Printouts have been requested Ñ do you want to print them now, or discard them?'
  4:
    Bounds: x1=12, y1=91, x2=224, y2=110
    Type: -120
    Info: 'Print remaining printouts now.'
  5:
    Bounds: x1=12, y1=122, x2=206, y2=141
    Type: -120
    Info: 'Discard remaining printouts.'

DITL_203_print delete alert.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=120, x2=332, y2=140
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=262, y1=89, x2=332, y2=109
    Type: 4
    Info: 'Discard'
  2:
    Bounds: x1=63, y1=16, x2=285, y2=36
    Type: -120
    Info: 'CAUTION: Printouts will be lost!'
  3:
    Bounds: x1=16, y1=50, x2=332, y2=82
    Type: -120
    Info: 'This will discard any previously requested printouts.'
  4:
    Bounds: x1=16, y1=91, x2=229, y2=110
    Type: -120
    Info: 'Discard remaining printouts.'
  5:
    Bounds: x1=17, y1=122, x2=258, y2=141
    Type: -120
    Info: 'Cancel Ñ donÕt discard printouts.'

DITL_202_quit alert.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=119, x2=332, y2=139
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=262, y1=89, x2=332, y2=109
    Type: 4
    Info: 'Quit'
  2:
    Bounds: x1=63, y1=16, x2=263, y2=36
    Type: -120
    Info: 'CAUTION: Work could be lost!'
  3:
    Bounds: x1=16, y1=50, x2=332, y2=86
    Type: -120
    Info: 'Quitting SoftPC will cause any unsaved work in a PC application to be lost.'
  4:
    Bounds: x1=16, y1=91, x2=256, y2=109
    Type: -120
    Info: 'Quit Ñ no files need to be saved.'
  5:
    Bounds: x1=16, y1=121, x2=256, y2=139
    Type: -120
    Info: 'Cancel Ñ files need to be saved.'

DITL_201_change alert.txt
Items: (6 entries)
  0:
    Bounds: x1=278, y1=141, x2=348, y2=161
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=278, y1=112, x2=348, y2=132
    Type: 4
    Info: 'Reset'
  2:
    Bounds: x1=63, y1=17, x2=359, y2=34
    Type: -120
    Info: 'CAUTION: Change requires resetting SoftPC!'
  3:
    Bounds: x1=20, y1=50, x2=357, y2=100
    Type: -120
    Info: 'The change you have made cannot take effect until SoftPC has been ÔresetÕ. This will cause any unsaved work in a PC application to be lost.'
  4:
    Bounds: x1=20, y1=114, x2=256, y2=133
    Type: -120
    Info: 'Reset Ñ no files need to be saved.'
  5:
    Bounds: x1=20, y1=143, x2=256, y2=162
    Type: -120
    Info: 'Cancel Ñ files need to be saved.'

DITL_200_reset alert.txt
Items: (6 entries)
  0:
    Bounds: x1=262, y1=119, x2=332, y2=139
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=262, y1=89, x2=332, y2=109
    Type: 4
    Info: 'Reset'
  2:
    Bounds: x1=63, y1=16, x2=263, y2=36
    Type: -120
    Info: 'CAUTION: Work could be lost!'
  3:
    Bounds: x1=12, y1=50, x2=332, y2=86
    Type: -120
    Info: 'Resetting the SoftPC will cause any unsaved work in a PC application to be lost.'
  4:
    Bounds: x1=12, y1=91, x2=256, y2=110
    Type: -120
    Info: 'Reset Ñ no files need to be saved.'
  5:
    Bounds: x1=12, y1=121, x2=256, y2=140
    Type: -120
    Info: 'Cancel Ñ files need to be saved.'

DITL_172_print cancel.txt
Items: (1 entries)
  0:
    Bounds: x1=12, y1=16, x2=290, y2=52
    Type: -120
    Info: '          To Cancel Printing Press ÒÐ.Ó.(Hold down the  key and type a period.)'

DITL_171_setup.txt
Items: (7 entries)
  0:
    Bounds: x1=10, y1=7, x2=42, y2=39
    Type: -96
    Info: '  '
  1:
    Bounds: x1=136, y1=15, x2=286, y2=35
    Type: -120
    Info: 'SoftPC Setup Problem'
  2:
    Bounds: x1=9, y1=43, x2=387, y2=77
    Type: -120
    Info: ''
  3:
    Bounds: x1=9, y1=79, x2=387, y2=113
    Type: -120
    Info: ''
  4:
    Bounds: x1=9, y1=116, x2=387, y2=150
    Type: -120
    Info: ''
  5:
    Bounds: x1=9, y1=153, x2=387, y2=187
    Type: -120
    Info: ''
  6:
    Bounds: x1=9, y1=190, x2=387, y2=224
    Type: -120
    Info: ''

DITL_170_error.txt
Items: (6 entries)
  0:
    Bounds: x1=253, y1=100, x2=323, y2=120
    Type: 4
    Info: 'Quit'
  1:
    Bounds: x1=253, y1=60, x2=323, y2=80
    Type: 4
    Info: 'Reset'
  2:
    Bounds: x1=253, y1=20, x2=323, y2=40
    Type: 4
    Info: 'Continue'
  3:
    Bounds: x1=10, y1=10, x2=42, y2=42
    Type: -96
    Info: '  '
  4:
    Bounds: x1=60, y1=20, x2=210, y2=40
    Type: -120
    Info: 'Unable To ProceedÉ'
  5:
    Bounds: x1=10, y1=50, x2=240, y2=130
    Type: -120
    Info: '^0^1'

DITL_161_hdisk getCfile.txt
Items: (14 entries)
  0:
    Bounds: x1=256, y1=139, x2=336, y2=157
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=427, y1=150, x2=507, y2=168
    Type: 4
    Info: ''
  2:
    Bounds: x1=256, y1=165, x2=336, y2=183
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=246, y1=28, x2=346, y2=48
    Type: -128
    Info: ''
  4:
    Bounds: x1=256, y1=60, x2=336, y2=78
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=256, y1=87, x2=336, y2=105
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=12, y1=28, x2=230, y2=158
    Type: 0
    Info: ''
  7:
    Bounds: x1=229, y1=28, x2=245, y2=158
    Type: 0
    Info: ''
  8:
    Bounds: x1=253, y1=121, x2=341, y2=122
    Type: -128
    Info: ''
  9:
    Bounds: x1=500, y1=40, x2=600, y2=80
    Type: -120
    Info: ''
  10:
    Bounds: x1=427, y1=174, x2=507, y2=192
    Type: -124
    Info: ''
  11:
    Bounds: x1=12, y1=165, x2=247, y2=183
    Type: -120
    Info: 'Current Hard Disk for C:'
  12:
    Bounds: x1=12, y1=184, x2=338, y2=218
    Type: -120
    Info: ''
  13:
    Bounds: x1=12, y1=8, x2=260, y2=27
    Type: -120
    Info: 'Select Hard Disk document for C:'

DITL_160_hdisk getDfile.txt
Items: (14 entries)
  0:
    Bounds: x1=259, y1=138, x2=339, y2=156
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=259, y1=193, x2=339, y2=211
    Type: 4
    Info: 'NewÉ'
  2:
    Bounds: x1=259, y1=166, x2=339, y2=184
    Type: 4
    Info: 'Cancel'
  3:
    Bounds: x1=246, y1=28, x2=350, y2=48
    Type: -128
    Info: ''
  4:
    Bounds: x1=259, y1=60, x2=339, y2=78
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=259, y1=87, x2=339, y2=105
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=12, y1=28, x2=230, y2=188
    Type: 0
    Info: ''
  7:
    Bounds: x1=229, y1=28, x2=245, y2=188
    Type: 0
    Info: ''
  8:
    Bounds: x1=253, y1=121, x2=341, y2=122
    Type: -128
    Info: ''
  9:
    Bounds: x1=500, y1=40, x2=600, y2=120
    Type: -120
    Info: ''
  10:
    Bounds: x1=259, y1=221, x2=339, y2=239
    Type: 4
    Info: 'None'
  11:
    Bounds: x1=12, y1=185, x2=215, y2=204
    Type: -120
    Info: 'Current Hard Disk for D:'
  12:
    Bounds: x1=12, y1=204, x2=244, y2=238
    Type: -120
    Info: ''
  13:
    Bounds: x1=12, y1=8, x2=260, y2=27
    Type: -120
    Info: 'Select Hard Disk document for D:'

DITL_153_ports putfile.txt
Items: (10 entries)
  0:
    Bounds: x1=218, y1=132, x2=288, y2=150
    Type: 4
    Info: 'Save'
  1:
    Bounds: x1=218, y1=160, x2=288, y2=178
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=177, x2=197, y2=193
    Type: -120
    Info: 'Save serial output in:'
  3:
    Bounds: x1=198, y1=29, x2=302, y2=49
    Type: -128
    Info: ''
  4:
    Bounds: x1=218, y1=56, x2=288, y2=74
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=218, y1=82, x2=288, y2=100
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=17, y1=196, x2=194, y2=212
    Type: 16
    Info: ''
  7:
    Bounds: x1=14, y1=29, x2=197, y2=175
    Type: -128
    Info: ''
  8:
    Bounds: x1=218, y1=188, x2=288, y2=206
    Type: 4
    Info: 'None'
  9:
    Bounds: x1=209, y1=116, x2=297, y2=117
    Type: -128
    Info: ''

DITL_152_fsa putfile.txt
Items: (15 entries)
  0:
    Bounds: x1=206, y1=138, x2=300, y2=158
    Type: 4
    Info: 'Open Folder'
  1:
    Bounds: x1=206, y1=230, x2=300, y2=250
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=331, y1=52, x2=514, y2=68
    Type: -120
    Info: 'dummy prompt'
  3:
    Bounds: x1=198, y1=46, x2=302, y2=66
    Type: -128
    Info: ''
  4:
    Bounds: x1=206, y1=70, x2=300, y2=90
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=206, y1=97, x2=300, y2=117
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=334, y1=73, x2=511, y2=89
    Type: -112
    Info: 'dummy name'
  7:
    Bounds: x1=14, y1=46, x2=193, y2=208
    Type: -128
    Info: ''
  8:
    Bounds: x1=206, y1=167, x2=300, y2=187
    Type: 4
    Info: 'Select'
  9:
    Bounds: x1=198, y1=46, x2=302, y2=66
    Type: -128
    Info: ''
  10:
    Bounds: x1=198, y1=46, x2=302, y2=66
    Type: -128
    Info: ''
  11:
    Bounds: x1=14, y1=219, x2=179, y2=254
    Type: -120
    Info: 'Current Mac volume or folder for Drive E:'
  12:
    Bounds: x1=14, y1=256, x2=304, y2=270
    Type: -120
    Info: ''
  13:
    Bounds: x1=198, y1=198, x2=308, y2=218
    Type: 4
    Info: 'Set File TypesÉ'
  14:
    Bounds: x1=12, y1=7, x2=290, y2=24
    Type: -120
    Info: 'Select Mac folder for Network Drive E:'

DITL_151_Create hdisk.txt
Items: (19 entries)
  0:
    Bounds: x1=218, y1=132, x2=288, y2=150
    Type: 4
    Info: 'Create'
  1:
    Bounds: x1=218, y1=160, x2=288, y2=178
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=14, y1=153, x2=197, y2=169
    Type: -120
    Info: 'Create Hard Disk called:'
  3:
    Bounds: x1=198, y1=29, x2=302, y2=49
    Type: -128
    Info: ''
  4:
    Bounds: x1=218, y1=56, x2=288, y2=74
    Type: 4
    Info: 'Eject'
  5:
    Bounds: x1=218, y1=82, x2=288, y2=100
    Type: 4
    Info: 'Drive'
  6:
    Bounds: x1=17, y1=180, x2=194, y2=194
    Type: 16
    Info: ''
  7:
    Bounds: x1=15, y1=29, x2=198, y2=144
    Type: -128
    Info: ''
  8:
    Bounds: x1=14, y1=230, x2=95, y2=250
    Type: 6
    Info: ' 1 Mbyte'
  9:
    Bounds: x1=14, y1=250, x2=95, y2=270
    Type: 6
    Info: ' 2 Mbyte'
  10:
    Bounds: x1=14, y1=270, x2=95, y2=290
    Type: 6
    Info: ' 3 Mbyte'
  11:
    Bounds: x1=101, y1=230, x2=185, y2=250
    Type: 6
    Info: ' 4 Mbyte'
  12:
    Bounds: x1=101, y1=250, x2=185, y2=270
    Type: 6
    Info: ' 5 Mbyte'
  13:
    Bounds: x1=101, y1=270, x2=185, y2=290
    Type: 6
    Info: '10 Mbyte'
  14:
    Bounds: x1=196, y1=230, x2=275, y2=250
    Type: 6
    Info: '15 Mbyte'
  15:
    Bounds: x1=196, y1=250, x2=275, y2=270
    Type: 6
    Info: '20 Mbyte'
  16:
    Bounds: x1=196, y1=270, x2=275, y2=290
    Type: 6
    Info: '30 Mbyte'
  17:
    Bounds: x1=15, y1=209, x2=115, y2=225
    Type: -120
    Info: 'Hard Disk Size:'
  18:
    Bounds: x1=208, y1=115, x2=301, y2=116
    Type: -128
    Info: ''

DITL_133_fsa types.txt
Items: (8 entries)
  0:
    Bounds: x1=236, y1=35, x2=296, y2=55
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=236, y1=62, x2=296, y2=82
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=28, y1=30, x2=164, y2=46
    Type: 6
    Info: 'ask for file type -'
  3:
    Bounds: x1=28, y1=46, x2=164, y2=62
    Type: 6
    Info: 'always use type -'
  4:
    Bounds: x1=28, y1=62, x2=220, y2=78
    Type: 6
    Info: 'automatically select type'
  5:
    Bounds: x1=8, y1=6, x2=120, y2=27
    Type: -120
    Info: 'On file creation:'
  6:
    Bounds: x1=172, y1=38, x2=214, y2=55
    Type: 16
    Info: ''
  7:
    Bounds: x1=120, y1=6, x2=308, y2=27
    Type: -120
    Info: ''

DITL_132_floppy drives.txt
Items: (18 entries)
  0:
    Bounds: x1=158, y1=214, x2=228, y2=234
    Type: 4
    Info: 'Select'
  1:
    Bounds: x1=286, y1=214, x2=356, y2=234
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=52, y1=39, x2=114, y2=53
    Type: 6
    Info: 'Empty'
  3:
    Bounds: x1=52, y1=79, x2=142, y2=93
    Type: 6
    Info: 'Slave PC'
  4:
    Bounds: x1=52, y1=119, x2=192, y2=133
    Type: 6
    Info: 'Apple 5.25'
  5:
    Bounds: x1=215, y1=39, x2=500, y2=53
    Type: 6
    Info: 'SuperDrive'
  6:
    Bounds: x1=215, y1=79, x2=500, y2=93
    Type: 6
    Info: 'SuperDrive'
  7:
    Bounds: x1=215, y1=119, x2=500, y2=133
    Type: 6
    Info: 'SuperDrive'
  8:
    Bounds: x1=215, y1=159, x2=500, y2=173
    Type: 6
    Info: 'SuperDrive'
  9:
    Bounds: x1=10, y1=69, x2=42, y2=101
    Type: -96
    Info: ' ‚'
  10:
    Bounds: x1=10, y1=110, x2=42, y2=142
    Type: -96
    Info: ' ƒ'
  11:
    Bounds: x1=10, y1=10, x2=260, y2=26
    Type: -120
    Info: 'Select floppy disk device for Drive A:'
  12:
    Bounds: x1=173, y1=30, x2=205, y2=62
    Type: -128
    Info: ''
  13:
    Bounds: x1=173, y1=70, x2=205, y2=102
    Type: -128
    Info: ''
  14:
    Bounds: x1=173, y1=110, x2=205, y2=142
    Type: -128
    Info: ''
  15:
    Bounds: x1=173, y1=150, x2=205, y2=182
    Type: -128
    Info: ''
  16:
    Bounds: x1=10, y1=30, x2=42, y2=62
    Type: -96
    Info: ' „'
  17:
    Bounds: x1=32, y1=214, x2=102, y2=234
    Type: 4
    Info: 'Eject'

DITL_131_print.txt
Items: (10 entries)
  0:
    Bounds: x1=262, y1=104, x2=327, y2=124
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=262, y1=142, x2=327, y2=162
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=8, y1=8, x2=136, y2=24
    Type: 8
    Info: 'Start Printing:'
  3:
    Bounds: x1=24, y1=32, x2=287, y2=49
    Type: 5
    Info: '30 seconds after last character sent'
  4:
    Bounds: x1=24, y1=56, x2=240, y2=72
    Type: 5
    Info: 'when I quit the PC application'
  5:
    Bounds: x1=8, y1=96, x2=208, y2=112
    Type: 8
    Info: 'PC application is installed for:'
  6:
    Bounds: x1=24, y1=120, x2=159, y2=136
    Type: 6
    Info: 'Epsonª FX-80'
  7:
    Bounds: x1=24, y1=169, x2=332, y2=186
    Type: 6
    Info: 'A Postscriptª printer (e.g. LaserWriterª)'
  8:
    Bounds: x1=37, y1=139, x2=117, y2=155
    Type: 5
    Info: 'PC Codes'
  9:
    Bounds: x1=125, y1=139, x2=238, y2=155
    Type: 5
    Info: 'Codepage 850'

DITL_130_Serial ports.txt
Items: (15 entries)
  0:
    Bounds: x1=410, y1=50, x2=480, y2=70
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=410, y1=81, x2=480, y2=101
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=20, y1=40, x2=130, y2=60
    Type: 6
    Info: 'modem port'
  3:
    Bounds: x1=20, y1=60, x2=120, y2=80
    Type: 6
    Info: 'printer port'
  4:
    Bounds: x1=20, y1=80, x2=70, y2=100
    Type: 6
    Info: 'file:'
  5:
    Bounds: x1=70, y1=82, x2=200, y2=102
    Type: 8
    Info: 'portdest'
  6:
    Bounds: x1=210, y1=40, x2=320, y2=60
    Type: 6
    Info: 'modem port'
  7:
    Bounds: x1=210, y1=60, x2=310, y2=80
    Type: 6
    Info: 'printer port'
  8:
    Bounds: x1=210, y1=80, x2=260, y2=100
    Type: 6
    Info: 'file:'
  9:
    Bounds: x1=260, y1=82, x2=390, y2=102
    Type: 8
    Info: 'portdest'
  10:
    Bounds: x1=10, y1=22, x2=190, y2=40
    Type: -120
    Info: 'Primary Serial Port (COM1:)'
  11:
    Bounds: x1=200, y1=22, x2=400, y2=40
    Type: -120
    Info: 'Secondary Serial Port (COM2:)'
  12:
    Bounds: x1=54, y1=105, x2=164, y2=125
    Type: 5
    Info: 'flow control'
  13:
    Bounds: x1=244, y1=105, x2=354, y2=125
    Type: 5
    Info: 'flow control'
  14:
    Bounds: x1=10, y1=2, x2=310, y2=20
    Type: -120
    Info: 'Select devices for PC serial ports'

DITL_129_help....txt
Items: (5 entries)
  0:
    Bounds: x1=265, y1=159, x2=335, y2=179
    Type: 4
    Info: 'Resume'
  1:
    Bounds: x1=10, y1=10, x2=42, y2=42
    Type: -96
    Info: ' €'
  2:
    Bounds: x1=50, y1=20, x2=225, y2=36
    Type: -120
    Info: 'Additional Information on '
  3:
    Bounds: x1=225, y1=20, x2=355, y2=36
    Type: -120
    Info: 'Menu Options '
  4:
    Bounds: x1=10, y1=50, x2=355, y2=150
    Type: -120
    Info: 'While this dialog box is present, selecting a menu option will provide more information on its action, rather than performing it. Click on the ÔResumeÕ button to return to normal.'

DITL_128_About SoftPCâ€¦.txt
Items: (4 entries)
  0:
    Bounds: x1=330, y1=225, x2=400, y2=245
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=198, y1=55, x2=403, y2=90
    Type: -120
    Info: 'Version String'
  2:
    Bounds: x1=248, y1=93, x2=403, y2=109
    Type: -120
    Info: 'Serial Number'
  3:
    Bounds: x1=5, y1=5, x2=393, y2=234
    Type: -64
    Info: ' €'